51单片机数控直流稳压电源毕业设计论文.doc

约38页DOC格式手机打开展开

51单片机数控直流稳压电源毕业设计论文,数控直流稳压电源设计论文摘要:本系统以直流电压源为核心,at89s52单片机为主控制器,通过键盘来设置直流电源的输出电压,设置步进等级可达0.1v,输出电压范围为0—9.9v,最大电流为330ma,并可由液晶屏显示实际输出电压值。系统有过流保护电路,当输出电流过大时功率管自动截至,而且有红色指示灯发出警报。本系统由单片...
编号:10-112067大小:612.50K
分类: 论文>通信/电子论文

内容介绍

此文档由会员 huangbinbest 发布

数控直流稳压电源设计


论文摘要:本系统以直流电压源为核心,AT89S52单片机为主控制器,通过键盘来设置直流电源的输出电压,设置步进等级可达0.1V,输出电压范围为0—9.9V,最大电流为330mA,并可由液晶屏显示实际输出电压值。系统有过流保护电路,当输出电流过大时功率管自动截至,而且有红色指示灯发出警报。本系统由单片机程控输出数字信号,经过D/A转换器(AD0832)输出模拟量,再经过运算放大器隔离放大,控制输出功率管的基极,随着功率管基极电压的变化而输出不同的电压。实际测试结果表明,本系统实际应用于需要高稳定度小功率恒压源的领域。
关键词: 直流稳压电源 单片机 数字控制

  Abstract:This system to dc voltage source as the core, mainly AT89S52 SCM, through the keyboard controller to install dc power supply output voltage, setting stepping class can reach.01v output voltage, the range of 0-9.9 V, the maximum current 330mA for, and can show the actual pipe by digital output voltage values. This system consists of microcontroller program output digital signal, through D/A converter (AD0832) output analog amplifier, through isolating amplifier output power, control of base, with the power to change the passive tube voltage output of different voltage. Test results show that this system application in need of high stability of small power constant-voltage source fields.

Keywords: regulated power supply of direct current; single2ch ip m icrocomputer, digital control