毕业论文 基于proe与cad的一级减速器设计.doc

约33页DOC格式手机打开展开

毕业论文 基于proe与cad的一级减速器设计,摘 要运用pro/e软件完成风扇的三维建模设计,其中运用了pro/e的草绘模块、曲面模块、零件模块等共同完成了风扇的叶片,后盖,前罩,底盘,支架,调空体等部件的模型设计,同时利用pro/e的组件模块进行了部件的装配。通过对各部件的设计,证明了pro/e软件在进行复杂典型产品开发过程中具有简单、方便、快捷等特点;同时在进...
编号:20-200225大小:2.05M
分类: 论文>机械工业论文

内容介绍

此文档由会员 ljjwl8321 发布

摘 要
运用Pro/E软件完成风扇的三维建模设计,其中运用了Pro/E的草绘模块、曲面模块、零件模块等共同完成了风扇的叶片,后盖,前罩,底盘,支架,调空体等部件的模型设计,同时利用Pro/E的组件模块进行了部件的装配。通过对各部件的设计,证明了Pro/E软件在进行复杂典型产品开发过程中具有简单、方便、快捷等特点;同时在进行装配过程中能够对某一零部件进行修饰,使装配效果更加完善。
关键词: 减速器 Pro/E 三维建模设计




The fan of modeling design based on Pre/E
Abstract
In this paper, the three-dimensional modeling design of the fan was designed by
the software of Pro/E. The design of five modeling Which include the fan blades, the
front cover, the back cover, the fame and body components was completed by the Sketch
of the module, surface modules, module parts of Pro/E. At the same time, module assembly
components and interference testing was complete through the component of Pro/E. Through
the design of the component, which prove that Pro/E software is simple, convenient, and fast
in a typical complex product development process. At the same time ,the assembly process can
be carried out on a modified parts so that the effect of complete assembly become more perfect.

Keywords: Fan, Pro/E, Three-dimensional modeling design







目 录
一 绪论………………………………………………………………………………4
1.1三维造型设计的现状和发展………………………………………………4
1.2常用三维造型软件介绍……………………………………………………5
1.3 Pro/E软件介绍……………………………………………………………5
1.4本文的主要研究内容………………………………………………………6
二 风扇造型设计及装配………………………………………………………9
2.1风扇组成部件设计………………………………………………………9
2.1.1减速器上下仰俯机构的设计………………………………………11
2.1.2减速器左右摇摆机构的设计………………………………………11
2.2风扇的装配………………………………………………………………11
2.2.1新建组件文件……………………………………………………11
2.2.2在缺省模式装配支架底盘………………………………………11
2.2.3装配调控体………………………………………………………11
2.2.4装配扇头…………………………………………………………11
2.2.5装配叶片…………………………………………………………11
2.2.6装配网罩…………………………………………………………11
2.2.7装配检查其余部件………………………………………………11
2.2.8生成装配爆炸图…………………………………………………11

三 参考文献…………………………………………………………………21
致谢…………………………………………………………………………22