毕业论文 微带缝隙天线的仿真分析.doc

约33页DOC格式手机打开展开

毕业论文 微带缝隙天线的仿真分析,摘要微带缝隙天线具有结构简单、加工方便、体积小、宽频带等特性,在微波毫米波系统应用广泛。论文利用ansoft hfss 12.0对一开在50×80 mm2地面上的缝隙天线进行了建模和仿真,缝隙的尺寸约为四分之一波长,开路在地面的边缘,由微带传输线馈电。文中计算了天线的回波损耗和方向图,与文献结果比较吻合,证明了仿真方法...
编号:25-200640大小:2.11M
分类: 论文>通信/电子论文

内容介绍

此文档由会员 ljjwl8321 发布

摘 要
微带缝隙天线具有结构简单、加工方便、体积小、宽频带等特性,在微波毫米波系统应用广泛。论文利用Ansoft HFSS 12.0对一开在50×80 mm2地面上的缝隙天线进行了建模和仿真,缝隙的尺寸约为四分之一波长,开路在地面的边缘,由微带传输线馈电。文中计算了天线的回波损耗和方向图,与文献结果比较吻合,证明了仿真方法的正确性,可为 微带缝隙天线的设计工作提供一定的参考。
关键词 微带缝隙天线 回波损耗 方向图

Abstract
Slot antenna has a simple structure, easy to process, small size, broadband and other characteristics, widely used in microwave, millimeter wave systems. In this paper, Ansoft HFSS 12.0 is used to analyze the slot antenna on a 50 × 80 mm2 open ground .The size of the slot is about quarterwavelength, cut in the finite ground plane edge, fed by a microstrip transmission line. The paper calculated the return loss and antenna radation pattern. Good agreement with the literature results proved the correctness of the simulation method can provide some reference for the design of the microstrip slot antenna.
Keywords microstrip slot antenna S11 radiation pattern


目 录
前 言 1
第1章 绪 论 2
1.1 研究背景及意义 2
1.2 天线特性的主要参数 3
1.3 微带缝隙天线的应用 6
1.4 Ansoft HFSS软件简介 7
1.5 论文的内容及安排 8
第2章 缝隙天线的理论分析 9
2.1 理想缝隙天线 9
2.2 有限大理想导体面缝隙天线 9
2.3 圆柱体表面上缝隙天线阵 11
2.4 微带缝隙天线 13
2.4.1 微带缝隙天线的结构 13
2.4.2 微带模型 13
2.4.3 微带天线的辐射机理 14
2.4.4 宽带缝隙天线 16
第3章 微带缝隙天线的仿真 20
3.1 创建微带缝隙天线模型 20
3.2 设置频率 23
3.3 仿真结果 24
结束语 28
谢 辞 29
参考文献 30