fxs80双出风口笼形转子选粉机.zip

ZIP格式版权申诉手机打开展开

fxs80双出风口笼形转子选粉机,摘 要   传统旋风选粉机因分离效率低而影响粉磨产品的产量和质量,采用导流口可调式双出风口旋风分离器技术取代传统单出风口分离器对传统旋风选粉机改造后,降阻节能作用显著,分离效率明显提高,其提高部分恰是捕集细粉增加部分,因而产品细度改观,比表面积增大。产量也随之提高了。         关键词:旋风分离器;选粉机;双出风...
编号:70-264990大小:137.30K
分类: 论文>机械工业论文

该文档为压缩文件,包含的文件列表如下:

内容介绍

原文档由会员 x673146968 发布

 摘 要
   传统旋风选粉机因分离效率低而影响粉磨产品的产量和质量,采用导流口可调式双出风口旋风分离器技术取代传统单出风口分离器对传统旋风选粉机改造后,降阻节能作用显著,分离效率明显提高,其提高部分恰是捕集细粉增加部分,因而产品细度改观,比表面积增大。产量也随之提高了。
   
   
   关键词:旋风分离器;选粉机;双出风口;细度
   
   
   
   
   
   
   
   
   
   
   
   
   
                  Abstract
Tradition whirlwind powder selecting machine had low separation efficiency,it influence the output and quality of the powder products.Adopting water conservancy diversion mouth but the mode one pair of air outlets whirlwind separator technology replaced the tradition single air outlets separator.After transformated the tradition whirlwind powder slecting machine ,the reduce obstruction function was remarkable.The separation fficiency obvious improved.It was the lucky catch and collect thin powder of the adding.So the thin degree of the products changed,than the surface increased.The quality also improved.


Keyword:Whirlwind separator;  Powder selecting machine;
      One pair of air outlets;  Thin degree;

 

 

 

                     目     录

引言…………………………………………………………………………………..1
正文…………………………………………………………………………………. 3
1.技改方案和措施…………………………………………………………………. 3
 1.1选粉室内部结构改造…………………………………………………………. 3
 1.2选粉室上部的内部结构进行更新……………………………………………. 4
 1.3选粉机外部工作环境的改善…………………………………………………. 6
 1.4改进选粉机……………………………………………………………………. 7
2.双粗风口旋风分离器……………………………………………………………. 8
 2.1工作原理及优点……………………………………………………………... 8
 2.2细粉集灰斗设计的弊与利………………………………………………….. 11
3.存在问题及诊断………………………………………………………………… 12
 3.1粗粉与细粉的分离………………………………………………………….. 13
 3.2细粉与气流的分离………………………………………………………….. 13
4.旋风选粉机的设计计算……………………………………………………….. 13
 4.1旋风选粉机的阻力损失计算……………………………………………….. 14
 4.2根据规格直径核算风量…………………………………………………….. 16
5.旋风筒管道阻力损失计算……………………………………………………….16
结论………………………………………………………………………………… 20
致谢………………………………………………………………………………… 21
参考文献…………………………………………………………………………….22
附件清单…………………………………………………………………………….23