机床支架的工艺工装设计.rar
机床支架的工艺工装设计,毕业论文标准word格式排版 35页 附夹具装配图0号图.dwg 垫铁.dwg 定位块.dwg 夹具体.dwg 铰链轴.dwg 连杆.dwg 量具.dwg零件图.dwg 螺栓.dwg 毛坯.dwg 支架.dwg 支轴.dwg 支座.dwg摘要本篇说明书中，主要是介绍了我这次设计的主要设计思路及设计过程。包括了两套专用夹...
该文档为压缩文件,包含的文件列表如下:
内容介绍
原文档由会员 莎士比亚 发布
毕业论文标准WORD格式排版 35页 附夹具装配图0号图.dwg 垫铁.dwg 定位块.dwg 夹具体.dwg 铰链轴.dwg 连杆.dwg 量具.dwg 零件图.dwg 螺栓.dwg 毛坯.dwg 支架.dwg 支轴.dwg 支座.dwg
摘 要
本篇说明书中，主要是介绍了我这次设计的主要设计思路及设计过程。包括了两套专用夹具的设计和刀具、量具的设计思路和设计过程，以及在致谢和参考文献。
我的设计课题是机床支架的工艺工装设计。设计的主要内容有：绘制零件图、设计夹具、刀具、量具等。由目录可详细了解论文的内容。此次设计，综合运用了本专业的各方面的专业知识，如《机械制图》、《机械制造工艺学》、《机床夹具设计》……在这整个设计过程中进一步加深并巩固了我这两年所学的知识，令我感到受益匪浅，收获颇丰。
由于个人能力和经验有限，设计中会出现很多不足之处，希望各位老师给予指教。
关键词：专用夹具；刀具；量具；机械制图
Abstract
In brief this instruction booklet, mainly was introduced my design main design mentality and the design process. In addition two sets of jigs supposing with cutting tool, measuring instrument design mentality and design process, as well as appendix and reference booklist, concluding remark.
My design topic is machine tool support, s technological design. May in detail understand the paper by the table of contents the content. This design, the synthesis has utilized this specialized various aspects of specialized knowledge, like "Mechanical drawing", "Machine manufacture Technology", "Engine bed Jig Design"... ... Further deepened and has consolidated the knowledge which I studied in this instituted during recent two years. Because individual ability and the experience are limited, in the design must appear very many deficiency, hoping fellow teachers give advice.
Keyword：special fixture; measure; holding device; machining drawing
引言……………………………………………………………………………………………1
第1章工艺规程设计…………………………………………………………………………2
1.1 零件分析 ………………………………………………………………………………2
1.2 确定毛坯、画毛坯图 …………………………………………………………………2
1.3 工艺规程设计 …………………………………………………………………………3
第2章工艺装备设计…………………………………………………………………………14
2.1 夹具的概念 …………………………………………………………………………15
2.2 夹具的基本要求 ……………………………………………………………………15
2.3 夹具的设计方法和步骤 ……………………………………………………………15
第3章量具设计 ……………………………………………………………………………20
3.1 量规的种类和作用 …………………………………………………………………23
3.2 量规设计 ……………………………………………………………………………23
3.3 量规的技术要求 ……………………………………………………………………24
结论 …………………………………………………………………………………………25
致谢 …………………………………………………………………………………………26
参考文献 ……………………………………………………………………………………27
附录A（英文原文）…………………………………………………………………………28
附录B（中文翻译）…………………………………………………………………………33
摘 要
本篇说明书中，主要是介绍了我这次设计的主要设计思路及设计过程。包括了两套专用夹具的设计和刀具、量具的设计思路和设计过程，以及在致谢和参考文献。
我的设计课题是机床支架的工艺工装设计。设计的主要内容有：绘制零件图、设计夹具、刀具、量具等。由目录可详细了解论文的内容。此次设计，综合运用了本专业的各方面的专业知识，如《机械制图》、《机械制造工艺学》、《机床夹具设计》……在这整个设计过程中进一步加深并巩固了我这两年所学的知识，令我感到受益匪浅，收获颇丰。
由于个人能力和经验有限，设计中会出现很多不足之处，希望各位老师给予指教。
关键词：专用夹具；刀具；量具；机械制图
Abstract
In brief this instruction booklet, mainly was introduced my design main design mentality and the design process. In addition two sets of jigs supposing with cutting tool, measuring instrument design mentality and design process, as well as appendix and reference booklist, concluding remark.
My design topic is machine tool support, s technological design. May in detail understand the paper by the table of contents the content. This design, the synthesis has utilized this specialized various aspects of specialized knowledge, like "Mechanical drawing", "Machine manufacture Technology", "Engine bed Jig Design"... ... Further deepened and has consolidated the knowledge which I studied in this instituted during recent two years. Because individual ability and the experience are limited, in the design must appear very many deficiency, hoping fellow teachers give advice.
Keyword：special fixture; measure; holding device; machining drawing
引言……………………………………………………………………………………………1
第1章工艺规程设计…………………………………………………………………………2
1.1 零件分析 ………………………………………………………………………………2
1.2 确定毛坯、画毛坯图 …………………………………………………………………2
1.3 工艺规程设计 …………………………………………………………………………3
第2章工艺装备设计…………………………………………………………………………14
2.1 夹具的概念 …………………………………………………………………………15
2.2 夹具的基本要求 ……………………………………………………………………15
2.3 夹具的设计方法和步骤 ……………………………………………………………15
第3章量具设计 ……………………………………………………………………………20
3.1 量规的种类和作用 …………………………………………………………………23
3.2 量规设计 ……………………………………………………………………………23
3.3 量规的技术要求 ……………………………………………………………………24
结论 …………………………………………………………………………………………25
致谢 …………………………………………………………………………………………26
参考文献 ……………………………………………………………………………………27
附录A（英文原文）…………………………………………………………………………28
附录B（中文翻译）…………………………………………………………………………33
