变压器-----外文翻译.doc
约9页DOC格式手机打开展开
变压器-----外文翻译,1. 介绍要从远端发电厂送出电能，必须应用高压输电。因为最终的负荷，在一些点高电压必须降低。变压器能使电力系统各个部分运行在电压不同的等级。本文我们讨论的原则和电力变压器的应用。2. 双绕组变压器变压器的最简单形式包括两个磁通相互耦合的固定线圈。两个线圈之所以相互耦合，是因为它们连接着共同的磁通。在电力应用中，使用层式...
内容介绍
此文档由会员 wanli1988go 发布
1. 介绍
要从远端发电厂送出电能，必须应用高压输电。因为最终的负荷，在一些点高电压必须降低。变压器能使电力系统各个部分运行在电压不同的等级。本文我们讨论的原则和电力变压器的应用。
2. 双绕组变压器
变压器的最简单形式包括两个磁通相互耦合的固定线圈。两个线圈之所以相互耦合，是因为它们连接着共同的磁通。
在电力应用中，使用层式铁芯变压器(本文中提到的)。变压器是高效率的，因为它没有旋转损失，因此在电压等级转换的过程中，能量损失比较少。典型的效率范围在92到99%，上限值适用于大功率变压器。
从交流电源流入电流的一侧被称为变压器的一次侧绕组或者是原边。它在铁圈中建立了磁通φ，它的幅值和方向都会发生周期性的变化。磁通连接的第二个绕组被称为变压器的二次侧绕组或者是副边。磁通是变化的；因此依据楞次定律，电磁感应在二次侧产生了电压。变压器在原边接收电能的同时也在向副边所带的负荷输送电能。这就是变压器的作用。
3. 变压器的工作原理
当二次侧电路开路是，即使原边被施以正弦电压Vp，也是没有能量转移的。外加电压在一次侧绕组中产生一个小电流Iθ。这个空载电流有两项功能：（1）在铁芯中产生电磁通，该磁通在零和 φm之间做正弦变化，φm是铁芯磁通的最大值；（2）它的一个分量说明了铁芯中的涡流和磁滞损耗。这两种相关的损耗被称为铁芯损耗。
1. INTRODUCTION
The high-voltage transmission was need for the case electrical power is to be provided at considerable distance from a generating station. At some point this high voltage must be reduced, because ultimately is must supply a load. The transformer makes it possible for various parts of a power system to operate at different voltage levels. In this paper we discuss power transformer principles and applications.
2. TOW-WINDING TRANSFORMERS
A transformer in its simplest form consists of two stationary coils coupled by a mutual magnetic flux. The coils are said to be mutually coupled because they link a common flux.
In power applications, laminated steel core transformers (to which this paper is restricted) are used. Transformers are efficient because the rotational losses normally associated with rotating machine are absent, so relatively little power is lost when transforming power from one voltage level to another. Typical efficiencies are in the range 92 to 99%, the higher values applying to the larger power transformers.
The current flowing in the coil connected to the ac source is called the primary winding or simply the primary. It sets up the flux φ in the core, which varies periodically both in magnitude and direction. The flux links the
要从远端发电厂送出电能，必须应用高压输电。因为最终的负荷，在一些点高电压必须降低。变压器能使电力系统各个部分运行在电压不同的等级。本文我们讨论的原则和电力变压器的应用。
2. 双绕组变压器
变压器的最简单形式包括两个磁通相互耦合的固定线圈。两个线圈之所以相互耦合，是因为它们连接着共同的磁通。
在电力应用中，使用层式铁芯变压器(本文中提到的)。变压器是高效率的，因为它没有旋转损失，因此在电压等级转换的过程中，能量损失比较少。典型的效率范围在92到99%，上限值适用于大功率变压器。
从交流电源流入电流的一侧被称为变压器的一次侧绕组或者是原边。它在铁圈中建立了磁通φ，它的幅值和方向都会发生周期性的变化。磁通连接的第二个绕组被称为变压器的二次侧绕组或者是副边。磁通是变化的；因此依据楞次定律，电磁感应在二次侧产生了电压。变压器在原边接收电能的同时也在向副边所带的负荷输送电能。这就是变压器的作用。
3. 变压器的工作原理
当二次侧电路开路是，即使原边被施以正弦电压Vp，也是没有能量转移的。外加电压在一次侧绕组中产生一个小电流Iθ。这个空载电流有两项功能：（1）在铁芯中产生电磁通，该磁通在零和 φm之间做正弦变化，φm是铁芯磁通的最大值；（2）它的一个分量说明了铁芯中的涡流和磁滞损耗。这两种相关的损耗被称为铁芯损耗。
1. INTRODUCTION
The high-voltage transmission was need for the case electrical power is to be provided at considerable distance from a generating station. At some point this high voltage must be reduced, because ultimately is must supply a load. The transformer makes it possible for various parts of a power system to operate at different voltage levels. In this paper we discuss power transformer principles and applications.
2. TOW-WINDING TRANSFORMERS
A transformer in its simplest form consists of two stationary coils coupled by a mutual magnetic flux. The coils are said to be mutually coupled because they link a common flux.
In power applications, laminated steel core transformers (to which this paper is restricted) are used. Transformers are efficient because the rotational losses normally associated with rotating machine are absent, so relatively little power is lost when transforming power from one voltage level to another. Typical efficiencies are in the range 92 to 99%, the higher values applying to the larger power transformers.
The current flowing in the coil connected to the ac source is called the primary winding or simply the primary. It sets up the flux φ in the core, which varies periodically both in magnitude and direction. The flux links the
