机械毕业设计论文cad图纸：珩齿加工机床设计—珩磨头的设计.zip
机械毕业设计论文cad图纸：珩齿加工机床设计—珩磨头的设计,毕业设计：珩齿加工机床设计—珩磨头的设计论文说明书共60页，字数总计：20710资料内容简介：a0-齿轮珩磨头.dwga1-滑座.dwga2-底座.dwga2-胎盖.dwga2-主轴.dwga3-摩擦盘.dwga3-偏心盘.dwga3-心轴.dwga3-压盘.dwg翻译.doc开题报告.doc实习报告.doc毕业设计论...
该文档为压缩文件,包含的文件列表如下:
内容介绍
原文档由会员 优秀排骨 发布
毕业设计：珩齿加工机床设计—珩磨头的设计
论文说明书共60页，字数总计：20710
资料内容简介：
A0-齿轮珩磨头.dwg
A1-滑座.dwg
A2-底座.dwg
A2-胎盖.dwg
A2-主轴.dwg
A3-摩擦盘.dwg
A3-偏心盘.dwg
A3-心轴.dwg
A3-压盘.dwg
翻译.doc
开题报告.doc
实习报告.doc
毕业设计论文说明书：珩齿加工机床设计—珩磨头的设计.doc
英文原文.PDF
中期报告.doc
摘 要
为了满足加工要求必须采取合理的技术措施，对机床进行改造，这就是巧改技术。本次设计的就是在普通机床上加上的珩磨头，使其变为珩齿机。我的任务就是这个珩磨头。
主要设计的任务有首先进行总体分析和论述，包括对巧改机床的论述，齿轮的加工以及珩磨的原理等做了介绍，确定将车床改装为卧式珩磨床，车床主轴作为间接动力源，带动珩磨头的主轴作主运动，用车床进给机构完成进给运动，实现珩齿加工。其次是对珩齿加工技术进行完整的详细的说明，包括珩齿技术的发展，应用范围，工作原理，操作方法，主要的优缺点等等，以及珩齿误差产生原因和修正的方法。后面的部分为本次设计重点，因为它的设计质量直接关系到被加工工件的加工质量，设计包括对珩磨头的一些主要零部件，珩磨轮，摩擦盘，压盘，偏心盘等等；支撑部件，如滑座，底座等等，轴类部件，包括主轴，心轴，对这些零件进行全面的分析和强度的计算以及校核，还包括部分夹具，弹簧，箱体的设计如胎盖，窥视盖等。
关键词：机床 珩齿机 珩磨头 齿轮加工
Abstract
In order to meet the processing required to take reasonable measures to modify the machine, which is skillfully to technology. The design is in general machine tools, coupled with the honing head, to become Heng machine. My task is the honing head.
The main task is the first design an overall analysis and exposition, including Qiao machine to the exposition, processing and honing gear such as the principle was introduced, to determine lathe converted to horizontal Heng grinder, lathe spindle indirectly as a power source, lead Honing the main disposes the first movement, with lathe feed into the agencies to complete the campaign, and Heng tooth processing. This was followed by the Heng tooth processing technology for a complete detailed description, including Heng tooth technology development, application of the principle of operation, the main advantages and disadvantages, and so on, and Heng teeth and causes errors that way. The back part of the design-oriented focus, because of its design quality was directly related to the processing of the workpiece processing quality, design, including the head of honing some of the major components, honing round, friction disc, the disc pressure, eccentric disk, etc.; Support Components, such as Waterloo, with the base, and so on, the shaft components, including the main shaft, spindle, for these parts to conduct a comprehensive analysis and intensity of the calculation and verification, including some fixture, spring, the box design such as fetal covered, Peep covered, and so on.
Key Words: machine tool heng machine honing head gear cutting
目 录
前 言 - 4 -
1、概 论 - 6 -
1. 1巧改机床的论述及任务 - 6 -
1．2齿轮加工 - 9 -
1．3珩磨加工 - 11 -
2、珩齿加工 - 14 -
2．1珩齿原理 - 14 -
2．2珩齿加工方法 - 15 -
2．3珩齿机 - 16 -
2．4珩磨轮 - 16 -
2．5加工余量的确定 - 18 -
2．6珩齿操作的调整 - 18 -
2．7珩齿修形的方法 - 19 -
2．8珩齿的误差分析 - 20 -
2．9珩齿的特点 - 21 -
2．10改装部分的组成 - 22 -
2．11珩磨头的结构 - 22 -
2．12珩磨头动作原理 - 23 -
2．13使用方法及注意事项 - 24 -
2．14珩齿的应用 - 25 -
3珩磨头的设计 - 26 -
3．1基本参数的确定 - 26 -
3．2珩磨轮的设计 - 31 -
3．3摩擦盘 - 34 -
3．4偏心盘的设计 - 39 -
3．5心轴 - 42 -
3．6弹簧的设计 - 45 -
3．7主轴的设计 - 48 -
3．8主轴的校核 - 50 -
3．9底座和滑座 - 53 -
3．10润滑和密封 - 55 -
结束语 - 58 -
致 谢 - 59 -
参考文献 - 60 -
论文说明书共60页，字数总计：20710
资料内容简介：
A0-齿轮珩磨头.dwg
A1-滑座.dwg
A2-底座.dwg
A2-胎盖.dwg
A2-主轴.dwg
A3-摩擦盘.dwg
A3-偏心盘.dwg
A3-心轴.dwg
A3-压盘.dwg
翻译.doc
开题报告.doc
实习报告.doc
毕业设计论文说明书：珩齿加工机床设计—珩磨头的设计.doc
英文原文.PDF
中期报告.doc
摘 要
为了满足加工要求必须采取合理的技术措施，对机床进行改造，这就是巧改技术。本次设计的就是在普通机床上加上的珩磨头，使其变为珩齿机。我的任务就是这个珩磨头。
主要设计的任务有首先进行总体分析和论述，包括对巧改机床的论述，齿轮的加工以及珩磨的原理等做了介绍，确定将车床改装为卧式珩磨床，车床主轴作为间接动力源，带动珩磨头的主轴作主运动，用车床进给机构完成进给运动，实现珩齿加工。其次是对珩齿加工技术进行完整的详细的说明，包括珩齿技术的发展，应用范围，工作原理，操作方法，主要的优缺点等等，以及珩齿误差产生原因和修正的方法。后面的部分为本次设计重点，因为它的设计质量直接关系到被加工工件的加工质量，设计包括对珩磨头的一些主要零部件，珩磨轮，摩擦盘，压盘，偏心盘等等；支撑部件，如滑座，底座等等，轴类部件，包括主轴，心轴，对这些零件进行全面的分析和强度的计算以及校核，还包括部分夹具，弹簧，箱体的设计如胎盖，窥视盖等。
关键词：机床 珩齿机 珩磨头 齿轮加工
Abstract
In order to meet the processing required to take reasonable measures to modify the machine, which is skillfully to technology. The design is in general machine tools, coupled with the honing head, to become Heng machine. My task is the honing head.
The main task is the first design an overall analysis and exposition, including Qiao machine to the exposition, processing and honing gear such as the principle was introduced, to determine lathe converted to horizontal Heng grinder, lathe spindle indirectly as a power source, lead Honing the main disposes the first movement, with lathe feed into the agencies to complete the campaign, and Heng tooth processing. This was followed by the Heng tooth processing technology for a complete detailed description, including Heng tooth technology development, application of the principle of operation, the main advantages and disadvantages, and so on, and Heng teeth and causes errors that way. The back part of the design-oriented focus, because of its design quality was directly related to the processing of the workpiece processing quality, design, including the head of honing some of the major components, honing round, friction disc, the disc pressure, eccentric disk, etc.; Support Components, such as Waterloo, with the base, and so on, the shaft components, including the main shaft, spindle, for these parts to conduct a comprehensive analysis and intensity of the calculation and verification, including some fixture, spring, the box design such as fetal covered, Peep covered, and so on.
Key Words: machine tool heng machine honing head gear cutting
目 录
前 言 - 4 -
1、概 论 - 6 -
1. 1巧改机床的论述及任务 - 6 -
1．2齿轮加工 - 9 -
1．3珩磨加工 - 11 -
2、珩齿加工 - 14 -
2．1珩齿原理 - 14 -
2．2珩齿加工方法 - 15 -
2．3珩齿机 - 16 -
2．4珩磨轮 - 16 -
2．5加工余量的确定 - 18 -
2．6珩齿操作的调整 - 18 -
2．7珩齿修形的方法 - 19 -
2．8珩齿的误差分析 - 20 -
2．9珩齿的特点 - 21 -
2．10改装部分的组成 - 22 -
2．11珩磨头的结构 - 22 -
2．12珩磨头动作原理 - 23 -
2．13使用方法及注意事项 - 24 -
2．14珩齿的应用 - 25 -
3珩磨头的设计 - 26 -
3．1基本参数的确定 - 26 -
3．2珩磨轮的设计 - 31 -
3．3摩擦盘 - 34 -
3．4偏心盘的设计 - 39 -
3．5心轴 - 42 -
3．6弹簧的设计 - 45 -
3．7主轴的设计 - 48 -
3．8主轴的校核 - 50 -
3．9底座和滑座 - 53 -
3．10润滑和密封 - 55 -
结束语 - 58 -
致 谢 - 59 -
参考文献 - 60 -
