注塑模具毕业设计论文cad图纸：光盘盒注塑模具设计及型腔仿真加工（proe三维图）.zip
注塑模具毕业设计论文cad图纸：光盘盒注塑模具设计及型腔仿真加工（proe三维图）,毕业设计：光盘盒注塑模具设计及型腔仿真加工论文说明书共28页，字数总计：13707资料简介：仿真加工pro-e三维图文献资料英文翻译a0-装配图.dwga3-大推杆.dwga3-带头倒套.dwga3-导杆固定板.dwga3-倒柱.dwga3-定模板.dwga3-定模固定板.dwga3-定模座板.dwga3-定位环.dw...
该文档为压缩文件,包含的文件列表如下:
内容介绍
原文档由会员 优秀排骨 发布
毕业设计：光盘盒注塑模具设计及型腔仿真加工
论文说明书共28页，字数总计：13707
资料简介：
仿真加工
Pro-E三维图
文献资料
英文翻译
A0-装配图.dwg
A3-大推杆.dwg
A3-带头倒套.dwg
A3-导杆固定板.dwg
A3-倒柱.dwg
A3-定模板.dwg
A3-定模固定板.dwg
A3-定模座板.dwg
A3-定位环.dwg
A3-动模底板.dwg
A3-动模座板.dwg
A3-光盘盒零件图.dwg
A3-滑座.dwg
A3-回程杆.dwg
A3-冷却水管接头.dwg
A3-推板.dwg
A3-推板导柱.dwg
A3-推杆固定板.dwg
A3-限距拉钉.dwg
A3-限距螺钉.dwg
A3-小推杆.dwg
A3-斜滑杆1.dwg
A3-斜滑杆2.dwg
A3-型腔板.dwg
A3-型芯.dwg
A3-直倒套.dwg
A3-主流道衬套.dwg
A4-光盘盒.dwg
A4-限距螺钉.dwg
A4-主流道衬套.dwg
毕业设计任务书.doc
毕业设计说明书封面.doc
设计说明书：光盘盒注塑模具设计及型腔仿真加工.doc
摘要.doc
型腔加工工序卡片.doc
型腔加工工艺卡片封面.doc
注塑工艺流程图封面.doc
注塑工艺流程图.doc
注塑模具装配工艺过程卡.doc
注塑模具装配工艺过程卡封面.doc
课题申报表.doc
三维图册.doc
毕业设计三维图集封面.doc
开题报告.doc
毕业实习报告.doc
光盘盒模具设计及其型腔仿真加工
摘 要：
模具制造技术迅速发展，已成为现代制造技术的重要组成部分。如模具的CAD/CAM技术，模具的激光快速成型技术，模具的精聾@尚渭际酰＞叩某芗庸ぜ际酢１究翁馍杓剖嵌怨馀毯心＞呱杓坪托颓环抡婕庸ぁＩ杓乒讨胁捎肞ro/E Wildfire 4.0进行三维造型、分型面设计和模流分析，用CAD进行零件图和装配图的绘制，用Pro/E进行模具型腔的仿真加工。
光盘盒的形状较为复杂，所以模具设计中要考虑的因素有很多，除考虑它的出模、分型面，还需考虑它成型的质量，表面光洁度等。更重要的是考虑它的制造难度和成本。所以我们设计应认真分析塑料制品的结构，寻求最佳的设计方案。分型面的选择也很重要，制件不是平直表面，制件的形状很不规则，分型面的选择既要考虑不影响制件表面的美观，又要达到结构要求。由于制品体积比较大，所以浇注系统的设计也很重要。在此次设计中塑件的两个盒面用两个完全弹性铰链连接，有侧凸和侧凹结构。模具采用一模一腔，两个点浇口注射，顶杆顶出，用斜滑杆机构实现内外侧抽芯，回程杆复位。
关键词：模具设计 仿真加工 注塑模具
The Design and Simulation Processing
of DVD box injection mold
Abstract: The mold manufacture technology rapid development, has become the modern manufacture technology the important constituent. If the mold CAD/CAM technology, the mold laser fast takes shape the technology, the mold precise formed technology, the mold ultra precise processing technology.This subject design is to design DVD box injection mold and make the simulation processing of the mold cavity. In the design process, Pro/E Wildfire 4.0 were used to construct on the three dimensional modeling, make parting surface and make analys on mold flows, CAD were used to make parts drawing and assembly drawing,Pro/E Wildfire 4.0 were used to carry on the mold cavity simulation processing.
The machine of CD the shape of the cover than for complicacy, so want in the molding tool design the factor of the consideration have a lot of, a mold, cent type that divided by the consideration it, still need the consideration quantity that it model, surface clean an etc..More important consideration it of manufacturing difficulty with cost.So our design should analyze the construction that plastics product hard, design project looking for best.The choice of the cent type is too very important, a shape for is not straight and even surface, the piece of system is very irregular, the choice of the cent type since consider to do not affect a superficial beauty, attain the construction request again.Because producting the physical volume bigger, so sprinkle the design that note the system too very important, here a design inside In this design The two parts of the disk-box are connected by tow hinge and the box have undercuts.There are only one cavity in this mold and two gates in this runner system. The lifter system is used to form the external undercut and internal undercut.
Key words: mold design processing simulation enjection mould
目 录
1 前言 1
2 模具总体设计 3
2.1 制品的分析 3
2.2模具总体方案设计 4
2.3注射机的选择 5
2.4型腔数的确定 6
2.5分型面的确定 6
2.6浇注系统设计 6
2.6.1浇口的形式 6
2.6.2流道、主流道衬套及定位环的设计 7
2.6.3冷料井的设计 8
2.7冷却系统的设计 9
2.8模架的选择 11
2.9导柱、导套的选择 12
2.9.1导柱的选择 12
2.9.2导套的选择 12
2.10顶杆设计 13
2.11复位杆 14
2.12锁模力的校核 15
2.13开模行程的校核 15
2.14总装配图及三维造型图 16
2.14.1总装配图 16
2.14.2模具的三维造型图 17
3工艺分析及仿真加工 18
3.1模具的注塑工艺分析 18
3.2模具成型件制造工艺与加工工序 20
3.2.1模具成型件制造工艺 20
3.2.2模具成型件的加工工艺 20
3.3数控仿真 20
4结论 24
参考文献 25
致谢 26
附录 27
论文说明书共28页，字数总计：13707
资料简介：
仿真加工
Pro-E三维图
文献资料
英文翻译
A0-装配图.dwg
A3-大推杆.dwg
A3-带头倒套.dwg
A3-导杆固定板.dwg
A3-倒柱.dwg
A3-定模板.dwg
A3-定模固定板.dwg
A3-定模座板.dwg
A3-定位环.dwg
A3-动模底板.dwg
A3-动模座板.dwg
A3-光盘盒零件图.dwg
A3-滑座.dwg
A3-回程杆.dwg
A3-冷却水管接头.dwg
A3-推板.dwg
A3-推板导柱.dwg
A3-推杆固定板.dwg
A3-限距拉钉.dwg
A3-限距螺钉.dwg
A3-小推杆.dwg
A3-斜滑杆1.dwg
A3-斜滑杆2.dwg
A3-型腔板.dwg
A3-型芯.dwg
A3-直倒套.dwg
A3-主流道衬套.dwg
A4-光盘盒.dwg
A4-限距螺钉.dwg
A4-主流道衬套.dwg
毕业设计任务书.doc
毕业设计说明书封面.doc
设计说明书：光盘盒注塑模具设计及型腔仿真加工.doc
摘要.doc
型腔加工工序卡片.doc
型腔加工工艺卡片封面.doc
注塑工艺流程图封面.doc
注塑工艺流程图.doc
注塑模具装配工艺过程卡.doc
注塑模具装配工艺过程卡封面.doc
课题申报表.doc
三维图册.doc
毕业设计三维图集封面.doc
开题报告.doc
毕业实习报告.doc
光盘盒模具设计及其型腔仿真加工
摘 要：
模具制造技术迅速发展，已成为现代制造技术的重要组成部分。如模具的CAD/CAM技术，模具的激光快速成型技术，模具的精聾@尚渭际酰＞叩某芗庸ぜ际酢１究翁馍杓剖嵌怨馀毯心＞呱杓坪托颓环抡婕庸ぁＩ杓乒讨胁捎肞ro/E Wildfire 4.0进行三维造型、分型面设计和模流分析，用CAD进行零件图和装配图的绘制，用Pro/E进行模具型腔的仿真加工。
光盘盒的形状较为复杂，所以模具设计中要考虑的因素有很多，除考虑它的出模、分型面，还需考虑它成型的质量，表面光洁度等。更重要的是考虑它的制造难度和成本。所以我们设计应认真分析塑料制品的结构，寻求最佳的设计方案。分型面的选择也很重要，制件不是平直表面，制件的形状很不规则，分型面的选择既要考虑不影响制件表面的美观，又要达到结构要求。由于制品体积比较大，所以浇注系统的设计也很重要。在此次设计中塑件的两个盒面用两个完全弹性铰链连接，有侧凸和侧凹结构。模具采用一模一腔，两个点浇口注射，顶杆顶出，用斜滑杆机构实现内外侧抽芯，回程杆复位。
关键词：模具设计 仿真加工 注塑模具
The Design and Simulation Processing
of DVD box injection mold
Abstract: The mold manufacture technology rapid development, has become the modern manufacture technology the important constituent. If the mold CAD/CAM technology, the mold laser fast takes shape the technology, the mold precise formed technology, the mold ultra precise processing technology.This subject design is to design DVD box injection mold and make the simulation processing of the mold cavity. In the design process, Pro/E Wildfire 4.0 were used to construct on the three dimensional modeling, make parting surface and make analys on mold flows, CAD were used to make parts drawing and assembly drawing,Pro/E Wildfire 4.0 were used to carry on the mold cavity simulation processing.
The machine of CD the shape of the cover than for complicacy, so want in the molding tool design the factor of the consideration have a lot of, a mold, cent type that divided by the consideration it, still need the consideration quantity that it model, surface clean an etc..More important consideration it of manufacturing difficulty with cost.So our design should analyze the construction that plastics product hard, design project looking for best.The choice of the cent type is too very important, a shape for is not straight and even surface, the piece of system is very irregular, the choice of the cent type since consider to do not affect a superficial beauty, attain the construction request again.Because producting the physical volume bigger, so sprinkle the design that note the system too very important, here a design inside In this design The two parts of the disk-box are connected by tow hinge and the box have undercuts.There are only one cavity in this mold and two gates in this runner system. The lifter system is used to form the external undercut and internal undercut.
Key words: mold design processing simulation enjection mould
目 录
1 前言 1
2 模具总体设计 3
2.1 制品的分析 3
2.2模具总体方案设计 4
2.3注射机的选择 5
2.4型腔数的确定 6
2.5分型面的确定 6
2.6浇注系统设计 6
2.6.1浇口的形式 6
2.6.2流道、主流道衬套及定位环的设计 7
2.6.3冷料井的设计 8
2.7冷却系统的设计 9
2.8模架的选择 11
2.9导柱、导套的选择 12
2.9.1导柱的选择 12
2.9.2导套的选择 12
2.10顶杆设计 13
2.11复位杆 14
2.12锁模力的校核 15
2.13开模行程的校核 15
2.14总装配图及三维造型图 16
2.14.1总装配图 16
2.14.2模具的三维造型图 17
3工艺分析及仿真加工 18
3.1模具的注塑工艺分析 18
3.2模具成型件制造工艺与加工工序 20
3.2.1模具成型件制造工艺 20
3.2.2模具成型件的加工工艺 20
3.3数控仿真 20
4结论 24
参考文献 25
致谢 26
附录 27
