注塑模具毕业设计论文cad图纸：pp-r三通接头注塑模具设计分析及主要加工工艺研究.zip
注塑模具毕业设计论文cad图纸：pp-r三通接头注塑模具设计分析及主要加工工艺研究,pp-r三通接头注塑模具设计分析及主要加工工艺研究论文说明书共28页，字数总计：12580资料内容简介：侧型芯a4.dwg侧型芯固定板a4.dwg垫块a4.dwg顶管a4.dwg定模板a2.dwg定模座板a2.dwg定位圈a4.dwg动模板a2.dwg动模支撑板a2.dwg动模座板a2.dwg复位杆.dwg滑块a2.d...
该文档为压缩文件,包含的文件列表如下:
内容介绍
原文档由会员 优秀排骨 发布
PP-R三通接头注塑模具设计分析及主要加工工艺研究
论文说明书共28页，字数总计：12580
资料内容简介：
侧型芯A4.dwg
侧型芯固定板A4.dwg
垫块A4.dwg
顶管A4.dwg
定模板A2.dwg
定模座板A2.dwg
定位圈A4.dwg
动模板A2.dwg
动模支撑板A2.dwg
动模座板A2.dwg
复位杆.dwg
滑块A2.dwg
滑块紧固A4.dwg
浇口套A4.dwg
上型芯A4.dwg
推板A2.dwg
下型芯A4.dwg
限位块A4.dwg
斜导柱A4.dwg
支撑板A2.dwg
装配A0.dwg
外文资料翻译.doc
目录.doc
论文.doc
开题报告.doc
封面、中外文摘要.doc
我毕业设计的课题是基于CAD/CAE技术的PP-R三通接头注塑模具设计及主要零件
加工工艺。从塑件的外形看，塑件有一个相对比较大且深的侧孔，塑件的外形决
定它需要通过侧向抽芯实现脱模，分析选择使用点浇口，在确定方案后使用了
CAE软件Moldflow对浇口位置及注塑过程进行分析、模拟，使注塑结果满足要求
，采用一模两腔，选择组合式凸凹模，外部用斜导柱-滑块侧向抽芯，推管顶出
机构。在设计中，用Pro/E进行三维造型，接着根据三维造型生成二维图，最后
对个别零件进行加工工艺分析。
关键词 注塑模具，三通，Moldflow，Pro/E
毕业设计说明书（论文）外文摘要
Title The Design and Analysis of Injection Mold of Three Links
Connector and Processing of Its Major Parts
Abstract
My subject of graduation design is the design and analysis of
injection molding of three links connector and processing of its major
parts with CAD/CAE. Look from the outline of produce, there is a
relatively large and deep hole at the side of the molded product. The
shape of the molded product decided it need Lateral core pulling
achieve demoulding. After analysis, choose hidden-gate. After
determining program, Moldflow of CAE software is used to snalysis gate
location and simulation injection process. Choose the best location of
the gate, make optimal injection results using a two-cavity. Choice
combined of punch and die, With external oblique derivative--lateral
extracting core slider, derivative--lateral is used to pull out
thecore on sides, striped off the inside by big core. In design,
Engineer 3D modeling module with PRO/E. Then, Generation two-
dimensional map from 3D Modeling. Finally, analysis processing of
fixed template.
Keywords injection mold, three links, moldflow，Pro/E
目 录
1 引言┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
1
2产品工艺性┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉2
2.1产品结构性能简介┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉2
2.2产品工艺分析┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉2
3成型工艺方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉4
3.1模具工艺方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉4
3.2设计方法的选择┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉4
4成型模具结构设计┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉5
4.1型腔布局以及分型面选择┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉5
4.2浇注系统方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉6
4.3排溢系统设计┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉11
4.4成型零件的设计┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉11
4.5 推出（脱模）机构方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉11
5工艺计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉15
5.1塑料制件的相关数据┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉15
5.2注射机的选择和校核┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉15
5.3开模行程的计算和模架的选择┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉16
5.4主流道及浇口的尺寸计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉17
5.5型腔和型芯的工作尺寸计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉17
5.6侧型芯抽拔力计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉20
5.7斜导柱倾角确定┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉21
5.8 斜导柱受力分析与强度计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉21
5.9斜导柱长度与直径的确定┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉23
5.10弹簧的选定┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
24
6工艺分析┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉24
结论┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉26
致谢┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉27
参考文献┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
28
论文说明书共28页，字数总计：12580
资料内容简介：
侧型芯A4.dwg
侧型芯固定板A4.dwg
垫块A4.dwg
顶管A4.dwg
定模板A2.dwg
定模座板A2.dwg
定位圈A4.dwg
动模板A2.dwg
动模支撑板A2.dwg
动模座板A2.dwg
复位杆.dwg
滑块A2.dwg
滑块紧固A4.dwg
浇口套A4.dwg
上型芯A4.dwg
推板A2.dwg
下型芯A4.dwg
限位块A4.dwg
斜导柱A4.dwg
支撑板A2.dwg
装配A0.dwg
外文资料翻译.doc
目录.doc
论文.doc
开题报告.doc
封面、中外文摘要.doc
我毕业设计的课题是基于CAD/CAE技术的PP-R三通接头注塑模具设计及主要零件
加工工艺。从塑件的外形看，塑件有一个相对比较大且深的侧孔，塑件的外形决
定它需要通过侧向抽芯实现脱模，分析选择使用点浇口，在确定方案后使用了
CAE软件Moldflow对浇口位置及注塑过程进行分析、模拟，使注塑结果满足要求
，采用一模两腔，选择组合式凸凹模，外部用斜导柱-滑块侧向抽芯，推管顶出
机构。在设计中，用Pro/E进行三维造型，接着根据三维造型生成二维图，最后
对个别零件进行加工工艺分析。
关键词 注塑模具，三通，Moldflow，Pro/E
毕业设计说明书（论文）外文摘要
Title The Design and Analysis of Injection Mold of Three Links
Connector and Processing of Its Major Parts
Abstract
My subject of graduation design is the design and analysis of
injection molding of three links connector and processing of its major
parts with CAD/CAE. Look from the outline of produce, there is a
relatively large and deep hole at the side of the molded product. The
shape of the molded product decided it need Lateral core pulling
achieve demoulding. After analysis, choose hidden-gate. After
determining program, Moldflow of CAE software is used to snalysis gate
location and simulation injection process. Choose the best location of
the gate, make optimal injection results using a two-cavity. Choice
combined of punch and die, With external oblique derivative--lateral
extracting core slider, derivative--lateral is used to pull out
thecore on sides, striped off the inside by big core. In design,
Engineer 3D modeling module with PRO/E. Then, Generation two-
dimensional map from 3D Modeling. Finally, analysis processing of
fixed template.
Keywords injection mold, three links, moldflow，Pro/E
目 录
1 引言┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
1
2产品工艺性┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉2
2.1产品结构性能简介┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉2
2.2产品工艺分析┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉2
3成型工艺方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉4
3.1模具工艺方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉4
3.2设计方法的选择┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉4
4成型模具结构设计┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉5
4.1型腔布局以及分型面选择┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉5
4.2浇注系统方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉6
4.3排溢系统设计┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉11
4.4成型零件的设计┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉11
4.5 推出（脱模）机构方案┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉11
5工艺计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉15
5.1塑料制件的相关数据┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉15
5.2注射机的选择和校核┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉15
5.3开模行程的计算和模架的选择┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉16
5.4主流道及浇口的尺寸计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉17
5.5型腔和型芯的工作尺寸计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉17
5.6侧型芯抽拔力计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉20
5.7斜导柱倾角确定┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉21
5.8 斜导柱受力分析与强度计算┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉21
5.9斜导柱长度与直径的确定┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉23
5.10弹簧的选定┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
24
6工艺分析┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
┉24
结论┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉26
致谢┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉27
参考文献┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉
28
