毕业设计：多功能组合铣夹具设计.zip

毕业设计：多功能组合铣夹具设计
论文说明书共39页，字数总计：15766
资料内容简介：
A1-夹具装配图.dwg
A2-对称槽长方支承.dwg
A2-装夹底座.dwg
A3-定位块.dwg
A3-加工零件图.dwg
A3-六角螺栓.dwg
A3-水平块.dwg
A3-压板.dwg
毕业设计论文说明书：多功能组合铣夹具设计.doc
毕业设计外文翻译.doc
开题报告.doc
中期报告.doc
(06020137)Locating completeness eva luation and revision in fixture plan.pdf
多功能组合铣夹具设计
摘 要
夹具是能够使产品按一定的技术要求准确定位和牢固夹紧的工艺装置，它的主要用于保证产品的加工质量、减轻劳动强度、辅助产品检测、展示、运输等。轴类工件是常见的工程结构，提高轴类工件铣床夹具设计效率有实际工程意义。
目前，世界上许多国家在计算机辅助夹具设计方面，都做了大量工作。我国在该项领域中尚处于研究阶段。计算机辅助夹具设计是通过计算机软件程序来完成夹具结构设计、总装图和零件图的绘制，以及制定出夹具零件的制造工艺等主要工作的计算机辅助机械设计的一个分支。传统的机床夹具设计需要检索许多资料，并花费许多绘图时间，设计的效率低、成本高。机床夹具设计往往还需借助于设计者的经验。计算机辅助夹具设计的开发和应用，既可缩短设计周期，又能促进机床夹具的标准化和系列化。
在计算机辅助夹具设计中，主要分为组合夹具和专用夹具设计二类。而国际上主要研究的对象是采用标准元件的槽系和孔系的组合夹具。当前国外正向开发夹具柔性化系统领域努力。夹具柔性化主要表现在以下两方面：一是结构的柔性化，即广泛采用标准元件的槽系和孔系组合夹具。二是夹具设计过程柔性化，也就是利用计算机技术和人工智能，把工程师设计夹具的过程描述为一个软件系统。

关键词：夹具；Solid Works；零件库；标准件；模型



Multi-functional combination milling fixture design
Abstract
Fixture is to make the products according to certain technical requirements for accurate positioning and firm clamping of the process device, its main products for processing to ensure quality, reduce labor intensity, support product testing, display and transportation. Shaft parts is a common project structure and improve the efficiency of shaft parts milling fixture design of practical engineering significance.
Currently, many countries in the computer-aided fixture design, has done a great job. China in the field research stage. Computer-aided fixture design by computer software applications to do Fixture Design, assembly Tu and mapping components, and fixture parts to develop manufacturing processes and other major work in a branch of computer aided mechanical design. The traditional design of jigs and fixtures need to retrieve a lot of information, and spend too much time drawing and design of low efficiency and high cost. Tool fixture design often need the help of the designer's experience. Computer-aided fixture design development and application, can shorten the design cycle, but also to promote the standardization and serialization of jigs and fixtures.
In the computer-aided fixture design, divided into modular fixture and special fixture design Type II. The major international study of the object is a standard component of the tank system and a combination of fixture holes. The current positive development of foreign systems in the field of flexible work fixture. Fixture flexibility lies in the following two aspects: First, the flexible structure, wide range of standard components that slot modular fixture system and holes. Second, the flexible fixture design process, that is using computer technology and artificial intelligence, to engineer the design process is described as a fixture of the software system.

Key words: Machine Tool Fixture；Solid Works；parts library；standard；model



主要符号表
M 弯矩
F 力
n 转速
ap 背吃刀量
T 寿命
d 直径
v 速度
f 进给量
L 长度
P 功率
p 压力
t 时间

目 录

1 绪论 1
1.1研究的目的及意义 1
1.2国内外的发展及研究状况 2
1.2.1国外发展现状 2
1.2.2国内发展现状 3
1.3本课题研究的内容 3
1.3.1研究内容 3
1.3.2研究意义 4
2 中型组合夹具概念 6
2.1夹具概念 6
2.2机床夹具的分类 6
2.3槽系列组合夹具概念 7
2.4组合夹具元件的分类和编号 8
2.5组合夹具的组装 10
2.6槽系列组合夹具元件与合件 11
3 Solid Works设计系统 16
3.1 Solid Works简介 16
3.1.1 Solid Works界面介绍 16
3.1.2 菜单简介 18
3.1.3 工具栏简介 18
3.1.4 Solid Works的设计思路 19
3.2 Solid Works三维建模 19
3.3三维装配 21
4 铣直槽夹具设计 23
4.1零件的结构分析 23
4.2 工艺规程设计 23
4.3夹具设计 24
5 总结 29
参考文献 30
致 谢 32

毕业设计(论文)知识产权声明 33
毕业设计(论文)独创性声明 34