住宅小区供配电系统设计.doc

约43页DOC格式手机打开展开

住宅小区供配电系统设计,摘要 要提高高层建筑配电系统的可靠性,要正确选择各类配电设备的容量,就必须科学、合理的进行负荷计算。本文对符合计算中的相关问题进行了分析和探讨,就重要设备的容量选择做了较为详细的论述,提出了一些进一步提高配电系统可靠性的措施,并结合工程实例进行负荷计算,计算结果证明本文所述方法是正确合理,可在实际...
编号:20-324448大小:358.10K
分类: 论文>电气自动化/电力论文

内容介绍

此文档由会员 v9999 发布

住宅小区供配电系统设计


摘要
   要提高高层建筑配电系统的可靠性,要正确选择各类配电设备的容量,就必须科学、合理的进行负荷计算。本文对符合计算中的相关问题进行了分析和探讨,就重要设备的容量选择做了较为详细的论述,提出了一些进一步提高配电系统可靠性的措施,并结合工程实例进行负荷计算,计算结果证明本文所述方法是正确合理,可在实际中应用。高层建筑比一般建筑遭受雷击的概率要大得多,而一旦遭受雷击,损失将非常严重。另外,普通建筑物防雷系统不但不能保护高层建筑物内的电子设备与计算机系统,反而可能会引入雷电。因此,高层建筑的防雷保护就越显重要,相应地对防雷保护提出了更高的要求。本文对于高层建筑物的防雷保护措施做了较为仔细的分析。
    关键词:配电系统;负荷计算;防雷设计;照明

Abstract
  In order to improve the reliability of power distribution system of high building,choice capacity of power distribution debice rightly,it is necessary tocalculate charge rightly,the author analyacs and investigatcs relative question with charge calculation,expatiates particularly capacity choice of important equipment,puts forward these measure being used to improve the reliability of power distribution system,makes charge calculation combination to project example,the result shows that these means is right and reasonable,these means can guide project practice. High buiding is easy suffered from lightning stroke,in case being suffered lightning stroke,it should bring huge losing,lightning protection system of common building can not protect electronic device,on the contrary,it may intoduce lifhtning therefore high building’s lightning protection is more important.The author analyses and research these question of over voltage and of lifhtning stroke,puts forward these means of lightning protescition of in high building.
    Keywords: power distribution system ;load calculation synthetic; lightning protection;Illumination                                               

目录

摘要 I
Abstract I
第一章 前言 1
第二章 工程概述 2
第三章 电气照明设计 3
3.1照明系统的概述 3
3.1.1照明系统的发展现状 3
3.1.2照明计量单位 3
3.2照度方式和种类 3
3.2.1照明方式 3
3.2.2照明种类 4
3.3照度计算 5
3.3.1利用系数法 5
3.3.2单位容量法 6
3.4该小区的电气照明设计 8
3.4.1电气照明设计的基本原则 8
3.4.2电气照明详细设计计算 8
3.5 插座系统 14
3.5.1插座系统的概述 14
3.5.2一般规定(规范) 14
3.5.3 插座的安装 14
3.5.4该小区住宅的插座系统设计 16
3.5 该小区标准层照明设计 17
第四章 低压配电系统设计 18
4.1 高层建筑一般规定 18
4.2低压配电系统线路的选择 20
4.2.1 低压线路接线方式 20
4.2.2导线和电缆的选择 22
4.3低压配电系统电气设备的选择 22
4.3.1 基本要求 22
4.3.2漏电保护 23
4.4配电变压器的选择 23
4.5小区的低压供配电系统设计 23
4.5.1 小区整体低压配电设计(见附录1) 23
4.5.2 小区1号楼与4号楼低压配电设计(见附录2) 24
4.5.3 小区2号楼与3号楼低压配电设计(见附录2) 24
4.5.4小区商业、电梯、车库、消防、物管用电低压配电设计(见附录3) 25
4.6负荷计算的方法 26
4.7小区住宅的负荷计算 27
第五章 防雷接地系统设计 32
5.1防雷与接地系统概述 32
5.1.1 防雷系统概述 32
5.1.2 建筑物的防雷等级 32
5.1.3高层建筑物的防雷措施 33
5.1.4接地系统概述 34
4.4小区1#楼接地设计 37
第六章 技术经济分析 38
参考文献 40