智能点火控制系统毕业设计.doc
约21页DOC格式手机打开展开
智能点火控制系统毕业设计,1.3万字 21页 包含设计图【摘要】本设计就是一个基于安全和方便考虑的燃气点火控制系统。系统由一片单片机控制，嵌入了能实时检测火焰燃烧情况的检测电路，当火焰熄灭时，系统将自动关闭气阀，防止燃气外泄，还可以在火焰熄灭一段时间后自动重新点火。系统由步进电机控制气阀，还设有两个按键来调节步进电机转动的步数，可以控制气阀的开...
内容介绍
此文档由会员 郑浩然 发布
1.3万字 21页 包含设计图
【摘要】本设计就是一个基于安全和方便考虑的燃气点火控制系统。系统由一片单片机控制，嵌入了能实时检测火焰燃烧情况的检测电路，当火焰熄灭时，系统将自动关闭气阀，防止燃气外泄，还可以在火焰熄灭一段时间后自动重新点火。系统由步进电机控制气阀，还设有两个按键来调节步进电机转动的步数，可以控制气阀的开度，从而控制火焰的大小，可以应用于不方便直接用手动调节气阀的场合。该设计结构简单，造价成本低，具有较强的安全性和可操作性。新点火。该设计结构简单，造价成本低，具有较强的安全性和可操作性。
【关键字】单片机 步进电机 按键 检测电路 重新点火
【Abstract】The design is based on a safe and convenient considering the gas ignition control system. The system controlled by a MCU. Ignition can be done automatically process, and through complete stepper motor control valve. System with two keys used to adjust the valve opening, thus control the size of the flame. System can also embedded real-time detection of the flame detection circuit. When the flame extinguished, System will automatically close the valve to prevent gas leaks. When the valve closed for some time, and if the MCU are still working, the system can achieve re-ignition. The design has a simple structure, a low cost, and a strong safety and operability.
【Keywords】MCU Stepper Motor Key Detection Circuit Re-ignition
【摘要】本设计就是一个基于安全和方便考虑的燃气点火控制系统。系统由一片单片机控制，嵌入了能实时检测火焰燃烧情况的检测电路，当火焰熄灭时，系统将自动关闭气阀，防止燃气外泄，还可以在火焰熄灭一段时间后自动重新点火。系统由步进电机控制气阀，还设有两个按键来调节步进电机转动的步数，可以控制气阀的开度，从而控制火焰的大小，可以应用于不方便直接用手动调节气阀的场合。该设计结构简单，造价成本低，具有较强的安全性和可操作性。新点火。该设计结构简单，造价成本低，具有较强的安全性和可操作性。
【关键字】单片机 步进电机 按键 检测电路 重新点火
【Abstract】The design is based on a safe and convenient considering the gas ignition control system. The system controlled by a MCU. Ignition can be done automatically process, and through complete stepper motor control valve. System with two keys used to adjust the valve opening, thus control the size of the flame. System can also embedded real-time detection of the flame detection circuit. When the flame extinguished, System will automatically close the valve to prevent gas leaks. When the valve closed for some time, and if the MCU are still working, the system can achieve re-ignition. The design has a simple structure, a low cost, and a strong safety and operability.
【Keywords】MCU Stepper Motor Key Detection Circuit Re-ignition
