ddr3 3d视觉检测包装机的设计.doc

  
约31页DOC格式手机打开展开

ddr3 3d视觉检测包装机的设计,ddr3 3d视觉检测包装机的设计目录第一章 绪论61.1 研发背景及意义61.2 基本设计思路和关键技术81.2.1 整机概述81.2.2 基本设计思路和关键技术8第二章ddr3 3d视觉检测包装机的机构分析102.1 机身部分112.2 皮带送料机构122.3 产品翻转定为工位和产品推送工位122.4 产品搬运机构...
编号:88-482193大小:2.00M
分类: 论文>机械工业论文

内容介绍

此文档由会员 hhllkk 发布

DDR3 3D视觉检测包装机的设计



目 录
第一章 绪 论 6
1.1 研发背景及意义 6
1.2 基本设计思路和关键技术 8
1.2.1 整机概述 8
1.2.2 基本设计思路和关键技术 8
第二章 DDR3 3D视觉检测包装机的机构分析 10
2.1 机身部分 11
2.2 皮带送料机构 12
2.3 产品翻转定为工位和产品推送工位 12
2.4 产品搬运机构 13
2.5 3D视觉检测工位 14
2.6 包装机 14
第三章 元件选型计算 16
3.1 传感器选型 16
3.2 马达选型 16
3.3 滚珠丝杠选型 19
3.4 真空吸盘的计算 22
3.5带传动的原理和特点 23
3.6 直线导轨的选型 24
3.7 CCD相机的选型 24
第四章 整机的组装及使用注意点 25
4.1 伺服滑台 25
4.1.1装机的关键点 25
4.1.2 调试的注意点 25
4.2 产品定位工位 26
4.3整机的使用注意点 26
第五章 总 结 28
致 谢 29
参考文献 30
附录一 专题综述
附录二 调研报告
附录三 外文翻译-原文部分
附录四 外文翻译-译文部分

引 言
机器视觉的研究是从20世纪60年代中期美国学者L.R.罗伯兹关于理解多面体组成的积木世界研究开始的。机器视觉的两大应用之一是检测,可分为高精度定量检测(例如显微照片的细胞分类、机械零部件的尺寸和位置测量)和不用量器的定性或半定量检测(例如产品的外观检查、装配线上的零部件识别定位、缺陷性检测与装配完全性检测)。
DDR3是一种电脑内存规格。它属于SDRAM家族的内存产品。本次课题就是针对DDR3内存条引脚共面度及好坏的一次物理检测,将会用到机器视觉检测技术(3D视觉检测技术)。



摘要: DDR3是一种电脑内存规格。它属于SDRAM家族的内存产品,提供了相较于DDR2 SDRAM更高的运行效能与更低的电压,是DDR2 SDRAM(四倍资料率同步动态随机存取内存)的后继者(增加至八倍),也是现时流行的内存产品。
CCD视觉检测系统属一种非接触测量手段.它是将从成像系统获得的图像信号变成CCD的电荷信号完成对图像的空间离散化过程,同时在CCD面阵上产生PAL制所需的同步信号、场同步信号和消影信号,合成完整的视频信号,输出后由计算机处理的方法[1,2] . 系统由光学系统(包括照明系统、成像系统、光学补偿系统)、面阵CCD接受系统、图像卡、监视器、计算机接口及计算机等组成。
本课题是DDR3 3D检测包装机的设计,对DDR3进行CCD检测并对合格的产品进行包装。要求设备结构简单,工作可靠,控制方便。拟使用电机(带减速器)、气缸为执行元件,光电检测开关等传感器进行位置检测,采用可编程控制器的控制方式。
关键字: DDR3;CCD摄像机;包装

DDR3 Three detection Visual inspection of the packaging machine design
Abstarct: DDR3 is a kind of computer memory size. It belongs to the family of SDRAM memory products, provide the higher efficiency and lower voltage compared with DDR2 SDRAM,which is DDR2 SDRAM (four times the rate of data synchronous dynamic random access memory) successor (up to eight times), is now popular memory products.
CCD visual inspection system is a kind of non-contact measurement means. It is from imaging system for image signal into the CCD signal charge to complete the image spatial discretization process, at the same time the required on the CCD plane array PAL sync signal, vertical sync signals and shadow elimination, synthesis of complete video signal, the output after the computer processing method of [1, 2]. System consists of optical system (including lighting system, imaging system, optical compensation system), the ccd-array receiving system, image card, monitor, computer interface and computer, etc.
This topic is DDR3 3d testing the design of the packing machine, DDR3 for CCD detection and the qualified product packaging. Request equipment has simple structure, reliable operation, easy to control. Motor ( with gear box)cylinder to be used as the execution component, photoelectric detection switch sensors such as position, adopting PLC control method.

Keywords:DDR3;CCD Testing;packing